Ergonomical Leveller

P-Series Hinged Lip dock leveller offers superior ergonomics with the hinged lip which always maintains a horizontal position. The unique and innovative patented parallelogram lip mechanism significantly reduces vibration and noise to ensure a smooth loading and unloading process to minimise the physical impact on personnel and equipment. With a dynamic load rating of 6 tons and an extensive range of platform sizes, the P-Series is suitable for use in almost any loading dock situation. It is especially suitable for pallet trucks with low ground level clearances and even the use of 3-wheel forklift trucks.
In case of premature vehicle departure whereby the forklift truck is still on the dock leveller, the automatic panic-stop activates. The leveller in most cases remains in operation even after a panic-stop situation.
  • Less Physical Impact to Personnel
  • Horizontal Lip in All Positions
  • Highly Efficient
  • Optimum Safety

 

DOWNLOAD BROCHURE TECHNICAL DRAWING

The platform, beams and lip are manufactured from high tensile steel (S355J0 / STEEL 52). Both the platform and the lip have a tear plate surface (8/10 mm and 13/15 mm respectively), making them suitable for 3-wheel forklift trucks.

Increased safety with standard 400 mm lip length and 80 mm chamfer on the front edge. The longer hinged lip makes sure that the gap between the vehicle and dock is safely bridged even when dock bumpers are installed.

The P-Series offers numerous possibilities customised to your dock for most efficient use. The length of the platform will primarily be determined by the height difference between the warehouse floor and the expected range of truck beds.

Easy installation with the P-Series for both the base-supported frame (PP) in a closed pit, or the suspended frame (PF) in an open pit.

Dynamic Capacity – P Series Leveller – 6 Tons

 

Height (mm) Warehouse top working range (mm)* Working range under warehouse (mm)* Case Height (mm)
PP PF PP PF PP PF
2000 195 215 254 265 585 700
2200 190 220 235 395 585 700
2500 270 245 225 335 585 700
2800 295 300 215 370 585 700
3000 265 270 215 360 585 700
3500 360 360 295 295 700 700
4000 370 370 280 280 700 700
4500 335 335 275 275 700 700

1750 mm, 1830 mm, 2000 mm, 2110 mm, 2250 mm platform width
* Calculated 400 mm lip and 100 mm chock protection
P = Pit Installation , F = Frame Installation

RELATED PRODUCTS

SWING LIP LEVELLER

 

The S-Series Standard Leveller is equipped with an unique open lip hinge and enables an easy and smooth transition between the warehouse floor and truck…

TELESCOPIC LIP LEVELLER

 

The telescopic lip is fully controllable at variable lengths of up to 1000 mm.This makes the dock leveller ideal for efficient loading and unloading end loads…

MINI LEVELLER

 

The Stertil EDGEDOCK Series mini-levellers are ideal where the height differences between warehouse floor and vehicle floor are minimal as in most cases…

Stertil Door and Door Products



Stertil Dock and Door Products provides wide range of options and models for different industries to offer the best suitable solution. We can design long lasting, efficient and secure loading areas with Stertil products.

How to design a Loading Bay?



The loading area design is the preliminary phase of the logistics chain. Many variables should be considered when designing an effective and safe loading area. This guide will help you throughout the whole process from start to finish and provide you with helpful tips to design and build your loading space construction. Our expert engineers will assist in the design of your loading space construction.